TRAINING

Training offered by us

 

PID Tuner Trainer

We use the PID Tuner Trainer in our courses, and we sell it as well. Figure 1 shows a photo of a PID Tuner Trainer with a Siemens S7-1200 PLC. This PLC adjusts the heaters (lamps), in order to control the temperature. The fan can be adjusted manually with a turning knob, but it can also be controlled by the PLC. The latter allows to create well-defined disturbances on the temperature that can be compensated by feedforward.
Most of our trainers are equipped with an Arduino PLC, but any control hardware can be applied.

 
 

Training with the lamp-setup

The video below shows how the PID-Tuner is used during our courses.